Featured Installation
January 2025 | view Schecter installation photos | view ALL installation photos

We have installed EverTune bridges on a lot of amazing guitars and always do our best to photograph them before sending them back out into the world. The EverTune In-House Installation Gallery lets you see over 600 guitars that we have retrofitted with the EverTune bridge. It is more than great guitar porn — although it is undeniably that. It’s a glimpse of what’s possible with EverTune. If you have a guitar that gets EverTune’d via our Installation Program, you might see it up in the Gallery someday soon!
Select an option below for your free quote
Installation Costs
Discounts will be applied to your quote.
F / F7 / F8 / T
MODEL BRIDGE INSTALLATION
$325.00 **
G
MODEL BRIDGE INSTALLATION
$375.00 **
- Installation prices include a setup with our default string packs (D'addario EXL 110 10-46) and tuning (EBGDAE). Other strings must be sent to us. Custom tunings must be listed in the form below.
- The neck has to be attached to the body in order for us to install in the proper position.
- Some bridges require light wood filling, such as Fender strats with the trem bar, for these installations we charge an extra $50.
- Certain guitars aren't recommended, such as Jazzmasters (not enough wood is removed to fill the hole left by the trem pocket) or Gibson ES330s (nothing solid to which attach the bridge). Chambered guitars are also unsuitable candidates unless you know the chambering is not at a support point. If there is any reason to make an exception, we'll let you know.
- We no longer offer installation services on guitars with an existing recessed bridge that would require a wood fill in order to install the EverTune system.
- F & T model Installation Notes: Minimum Body thickness for an F&T install is 1 3/4”. Any guitar body thickness less than 1 3/4” will require the foot plate to be installed on top of a custom back plate riser to ensure proper positioning of the modules.
- G model Installation Notes: The guitar body has to be 2.1” to do a standard G model installation where you recess the two back plate covers on the back of the guitar. Any guitar that requires a G model bridge with a body thickness of less than 2.1” will be a route through body installation and will require a F or T model back plate to cover the route pocket on the back. We recommend the T back plate for route through body installations due to the smaller footprint.
- To recess the footplate, the guitar body has to be at least 1 7/8” in order not to have to use a custom back plate riser.
- Any guitar body thickness less than 1 3/4” will require the foot plate to be installed on top of a custom back plate riser to ensure proper positioning of the modules.
- G model Standard or G model Long: If the bridge pickup is 5/8” or less from the scale length line, the G model Standard bridge is required. If the bridge pickup is more than 5/8” from the scale length line, the G model Long bridge is required and these almost always need to be milled down for an exact fit.
- For most G model installs original Tune-O-Matic Studs and their anchors will have to be pulled and refilled. Depending on the type of finish on the guitar and glues used on the original stud sleeves, this can, in some rare cases, remove finish around the holes. In these rare cases we will try to save any loose finish and re-glue it, and, in the case of glossy finish we will attempt to match the finish so that nothing is visible, in the case of matte finishes matching finish may be impossible.
- We will install 7 and 8 string bridges onto guitars that have G model string heights. In this case we use the F7 and F8 bridges and make a custom steel or aluminum riser plate. The cost for these installations are the G model cost plus $50. The plates will be spray painted to a close finish match, since they are custom cut, they will not be plated.
- The EverTune Custom Installation Program is available to over 100 countries. If there's any restrictions due to your territory, we'll let you know in the quote.
- ** Installation costs shown exclude the cost of the bridges to be installed. Visit SHOP : BRIDGES for current prices.
The Process
Please fill out the form below and follow the instructions for email verification. We will review and send a quote within 72 hours.
Upon acceptance of our proforma quotation, send us the guitar for installation. Turnaround time is about 2 - 3 weeks. Upon notification that installation is complete, payment is due. Once we receive payment and a return shipping label we will immediately ship the guitar back.
- FILL OUT THE FORM
- ACCEPT THE QUOTE
- SEND YOUR GUITAR
- INSTALLATION
- PAYMENT
* What do we mean by ANY NEW GUITAR ?
We mean any brand, any model, any finish, any neck, any hardware.
As long as it's a manufacturer's option and it can be ordered online, we can do it.
Left handers welcome!
Fill out the form below to get your free quote.
EverTune will take care of ordering the guitar to our headquarters and we will take care of the EverTune bridge install for you in-house. Then we'll send out your brand-new guitar with your brand-new EverTune bridge ready to play, wherever you live! You get the guitar plus EverTune at about the price of both separately. Essentially, with this feature, EVERY possible guitar on the market today can be evertuned for about $300 extra**
- ** This is an approximation that works for most guitars. Our quote pricing depends on the price we can obtain that new guitar for. On some models that are less expensive or sold well below street price from one vendor, the quote may be up to $200 more than the lowest advertised price of that model plus the bridge.
- Certain guitars aren't recommended, such as Jazzmasters (not enough wood is removed to fill the hole left by the trem pocket) or Gibson ES330s (nothing solid to which attach the bridge). Chambered guitars are also unsuitable candidates unless you know the chambering is not at a support point. If there is any reason to make an exception, we'll let you know.
- We no longer offer installation services on guitars with an existing recessed bridge that would require a wood fill in order to install the EverTune system.
- F & T model Installation Notes: Minimum Body thickness for an F&T install is 1 3/4”. Any guitar body thickness less than 1 3/4” will require the foot plate to be installed on top of a custom back plate riser to ensure proper positioning of the modules.
- G model Installation Notes: The guitar body has to be 2.1” to do a standard G model installation where you recess the two back plate covers on the back of the guitar. Any guitar that requires a G model bridge with a body thickness of less than 2.1” will be a route through body installation and will require a F or T model back plate to cover the route pocket on the back. We recommend the T back plate for route through body installations due to the smaller footprint.
- To recess the footplate, the guitar body has to be at least 1 7/8” in order not to have to use a custom back plate riser.
- Any guitar body thickness less than 1 3/4” will require the foot plate to be installed on top of a custom back plate riser to ensure proper positioning of the modules.
- G model Standard or G model Long: If the bridge pickup is 5/8” or less from the scale length line, the G model Standard bridge is required. If the bridge pickup is more than 5/8” from the scale length line, the G model Long bridge is required and these almost always need to be milled down for an exact fit.
- For most G model installs original Tune-O-Matic Studs and their anchors will have to be pulled and refilled. Depending on the type of finish on the guitar and glues used on the original stud sleeves, this can, in some rare cases, remove finish around the holes. In these rare cases we will try to save any loose finish and re-glue it, and, in the case of glossy finish we will attempt to match the finish so that nothing is visible, in the case of matte finishes matching finish may be impossible.
- The EverTune Custom Installation Program is available to over 100 countries. If there's any restrictions due to your territory, we'll let you know in the quote.
- USA ground shipping $49.95. For all other shipping methods and areas please provide the shipping address and we will update the quote.
The Process
Please fill out the form below and follow the instructions for email verification. We will review and send a quote within 72 hours.
Upon acceptance of our proforma quotation, send us the guitar for installation. Turnaround time is about 2 - 3 weeks. Upon notification that installation is complete, payment is due. Once we receive payment and a return shipping label we will immediately ship the guitar back.
- FILL OUT THE FORM
- ACCEPT THE QUOTE
- PAYMENT
- ORDER + INSTALLATION
- NEW GUITAR
GUITAR Subscriber Offers & News
Limited-time EverTune discounts offered to subscribers first.
- NEWS
- Most Recent News
- RESOURCES + SUPPORT
- Most Requested
- Buying Guide
- For Players
- For Installers
- Knowledge Base
- TESTIMONIALS
- Featured Artist
- Testimonials
- MANUALS
- User Manual
- Quick Start Guide
- CONTACT
- Contact Us
- Privacy Policy